Salesforce Data Sources

Salesforce data sources use a Teiid specific JCA connector that is deployed into WildFly 15.0.1 during installation. There are three versions of the salesforce resource adapter - salesforce, which currently provides connectivity to the 34.0 Salesforce API, salesforce-34, which provides connectivity to the 34.0 Salesforce API, and salesforce-41. The version 22.0 support has been removed.

Note
 If you need connectivity to an API version other than what is built in, you may try to use an existing connectivity pair, but in some circumstances - especially accessing a later remote api from an older java api - this is not possible and results in what appears to be hung connections. Please raise an issue if you cannot successfully access a specific API version.

There are many ways to create the salesforce data source, using CLI,AdminAPI, admin-console etc. The example shown below uses the CLI tool, as this works in both Standalone and Domain modes.

Execute following command using the CLI once you connected to the Server. Make sure you provide the correct URL and user credentials. Add any additional properties required by the connector by duplicating the "connection-definitions" command below. Edit the JNDI name to match the JNDI name you used in VDB.

batch
/subsystem=resource-adapters/resource-adapter=salesforce/connection-definitions=sfDS:add(jndi-name=java:/sfDS, class-name=org.teiid.resource.adapter.salesforce.SalesForceManagedConnectionFactory, enabled=true, use-java-context=true)
/subsystem=resource-adapters/resource-adapter=salesforce/connection-definitions=sfDS/config-properties=URL:add(value=https://login.salesforce.com/services/Soap/u/34.0)
/subsystem=resource-adapters/resource-adapter=salesforce/connection-definitions=sfDS/config-properties=username:add(value={user})
/subsystem=resource-adapters/resource-adapter=salesforce/connection-definitions=sfDS/config-properties=password:add(value={password})
/subsystem=resource-adapters/resource-adapter=salesforce:activate
runbatch

The salesforce-xx connection definition configuration is similar to the above. The resource adapter name would instead be salesforce-xx, and the url would point to a later version.

To find out all the properties that are supported by this Salesforce Connector execute the following command in the CLI.

/subsystem=teiid:read-rar-description(rar-name=salesforce)
Tip
 Developer’s Tip - If WildFly 15.0.1 is running in standalone mode, you can also manually edit the "<jboss-install>/standalone/configuration/standalone-teiid.xml" file and add the XML configuration defined in *"<jboss-install>/docs/teiid/datasources/salesforce" directory under "resource-adapters" subsystem. Shutdown the server before you edit this file, and restart after the modifications are done.

Mutual Authentication

If you need to connect to Salesforce using Mutual Authentication, follow the directions to setup Salesforce at https://help.salesforce.com/apex/HTViewHelpDoc?id=security_keys_uploading_mutual_auth_cert.htm&language=en_US then configure the below CXF configuration file on the resource-adapter by adding following property to above cli script

/subsystem=resource-adapters/resource-adapter=salesforce/connection-definitions=sfDS/config-properties=ConfigFile:add(value=${jboss.server.config.dir}/cxf-https.xml)
cxf-https.xml
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:sec="http://cxf.apache.org/configuration/security"
    xmlns:http-conf="http://cxf.apache.org/transports/http/configuration"
    xmlns:jaxws="http://java.sun.com/xml/ns/jaxws"
    xsi:schemaLocation="http://cxf.apache.org/transports/http/configuration http://cxf.apache.org/schemas/configuration/http-conf.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd http://cxf.apache.org/configuration/security http://cxf.apache.org/schemas/configuration/security.xsd">

    <http-conf:conduit name="*.http-conduit">
        <http-conf:client ConnectionTimeout="120000" ReceiveTimeout="240000"/>
        <http-conf:tlsClientParameters secureSocketProtocol="SSL">
          <sec:trustManagers>
            <sec:keyStore type="JKS" password="changeit" file="/path/to/truststore.jks"/>
          </sec:trustManagers>
        </http-conf:tlsClientParameters>
    </http-conf:conduit>
</beans>

more information about CXF configuration file can be found at http://cxf.apache.org/docs/client-http-transport-including-ssl-support.html#ClientHTTPTransport(includingSSLsupport)-ConfiguringSSLSupport

h== OAuth Security with "Refresh Token"

The below layout the directions to use Refresh Token based OAuth Authentication with Salesforce.

1) create connected app (may need to setup custom domain) 2) add profile and/or permissions set to the connected app 3) grab the "callback url" ( one need to set as https://localhost:443/_callback" 4) Run through the teiid-oauth-util.sh in "<eap>/bin" directory, use client_id, client_pass, and call back from connected app 5) use "https://login.salesforce.com/services/oauth2/authorize" authorize link 6) use "https://login.salesforce.com/services/oauth2/token" for access token url 7) the you get a refresh token from it 8) create a security-domain by executing CLI

/subsystem=security/security-domain=oauth2-security:add(cache-type=default)
/subsystem=security/security-domain=oauth2-security/authentication=classic:add
/subsystem=security/security-domain=oauth2-security/authentication=classic/login-module=Kerberos:add(code=org.teiid.jboss.oauth.OAuth20LoginModule, flag=required, module=org.jboss.teiid.security,
   module-options=[client-id=xxxx, client-secret=xxxx, refresh-token=xxxx,
   access-token-uri=https://login.salesforce.com/services/oauth2/token])
reload

this will generate following XML in the standalone.xml or domain.xml (this can also be directly added to the standalone.xml or domain.xml files instead of executing the CLI)

standalone.xml
<security-domain name="oauth2-security">
    <authentication>
        <login-module code="org.teiid.jboss.oauth.OAuth20LoginModule" flag="required" module="org.jboss.teiid.security">
            <module-option name="client-id" value="xxxx"/>
            <module-option name="client-secret" value="xxxx"/>
            <module-option name="refresh-token" value="xxxx"/>
            <module-option name="access-token-uri" value="https://login.salesforce.com/services/oauth2/token"/>
        </login-module>
    </authentication>
</security-domain>

9) Then to use the above security domain in the sales force data source configuration, add "<security-domain>oauth2-security</security-domain>"

OAuth Security with "JWT Token" based Steps

The below layout the directions to use JWT token based OAuth Authentication with Salesforce.

1) Create a Self-Signed certificate locally or on Sales Force. (user→setup→security-controls→Certificate and Key Management) 2) Download the certificate and also put in keystore and download keystore. Keystore is needed for Teiid, certificate for the salesforce setup 3) Create connected app and select OAuth, and select all the scopes (some posts say refresh-token offline is must) 4) create a profile and/or permission set assign to the connected app. I believe before you can create a connected app you need to set up custom domain 5) When you creating connected app make sure you add the certificate in "Digital Certificate" 6) Now in Teiid create security-domain by executing CLI

/subsystem=security/security-domain=oauth2-jwt-security:add(cache-type=default)
/subsystem=security/security-domain=oauth2-jwt-security/authentication=classic:add
/subsystem=security/security-domain=oauth2-jwt-security/authentication=classic/login-module=oauth:add(code=org.teiid.jboss.oauth.OAuth20LoginModule, flag=required, module=org.jboss.teiid.security,
   module-options=[client-id=xxxx, client-secret=xxxx, access-token-uri=https://login.salesforce.com/services/oauth2/token, jwt-audience=https://login.salesforce.com, jwt-subject=your@sf-login.com,
    keystore-type=JKS, keystore-password=changeme, keystore-url=${jboss.server.config.dir}/salesforce.jks, certificate-alias=teiidtest, signature-algorithm-name=SHA256withRSA])
reload

this will generate following XML in the standalone.xml or domain.xml (this can also be directly added to the standalone.xml or domain.xml files instead of executing the CLI)

standalone.xml
<security-domain name="oauth2-jwt-security">
    <authentication>
        <login-module code="org.teiid.jboss.oauth.JWTBearerTokenLoginModule" flag="required" module="org.jboss.teiid.security">
            <module-option name="client-id" value="xxxxx"/>
            <module-option name="client-secret" value="xxxx"/>
            <module-option name="access-token-uri" value="https://login.salesforce.com/services/oauth2/token"/>
            <module-option name="jwt-audience" value="https://login.salesforce.com"/>
            <module-option name="jwt-subject" value="your@sf-login.com"/>

            <module-option name="keystore-type" value="JKS"/>
            <module-option name="keystore-password" value="changeme"/>
            <module-option name="keystore-url" value="${jboss.server.config.dir}/salesforce.jks"/>
            <module-option name="certificate-alias" value="teiidtest"/>
            <module-option name="signature-algorithm-name" value="SHA256withRSA"/>
        </login-module>
    </authentication>
</security-domain>

7) Then to use the above security domain in the sales force data source configuration, add "<security-domain>oauth2-jwt-security</security-domain>"

More helpful links

https://developer.salesforce.com/blogs/developer-relations/2011/03/oauth-and-the-soap-api.html https://help.salesforce.com/apex/HTViewHelpDoc?id=remoteaccess_oauth_jwt_flow.htm&language=en_US#create_token http://salesforce.stackexchange.com/questions/31904/how-and-when-does-a-salesforce-saml-oauth2-user-give-permission-to-use-a-conne http://salesforce.stackexchange.com/questions/30596/oauth-2-0-jwt-bearer-token-flow http://salesforce.stackexchange.com/questions/88396/invalid-assertion-error-in-jwt-bearer-token-flow

Logging

Logging, when enabled, will be performed at an INFO level to the org.apache.cxf.interceptor context.

Per Resource Adapder

The CXF config property may also be used to control the logging of requests and responses.

Example logging data source
<resource-adapter id="salesforce-ds">
    <module slot="main" id="org.jboss.teiid.resource-adapter.salesforce-34"/>
    <transaction-support>NoTransaction</transaction-support>
    <connection-definitions>
        <connection-definition class-name="org.teiid.resource.adapter.salesforce.SalesForceManagedConnectionFactory" jndi-name="java:/salesforce_bulk_api" enabled="true" use-java-context="true" pool-name="salesforce-ds">
            <config-property name="password">
                token
            </config-property>
            <config-property name="URL">
                https://login.salesforce.com/services/Soap/u/34.0
            </config-property>
            <config-property name="username">
                name
            </config-property>
            <config-property name="ConfigFile">
                /path/to/cxf.xml
            </config-property>
        </connection-definition>
    </connection-definitions>
</resource-adapter>

Corresponding cxf.xml

Example logging data source
<beans xmlns="http://www.springframework.org/schema/beans"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xmlns:cxf="http://cxf.apache.org/core"
      xsi:schemaLocation="http://cxf.apache.org/core http://cxf.apache.org/schemas/core.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd">

    <bean id="loggingFeature" class="org.apache.cxf.feature.LoggingFeature"/>
    <cxf:bus>
        <cxf:features>
            <ref bean="loggingFeature"/>
        </cxf:features>
    </cxf:bus>
</beans>

All CXF Usage

With the WildFly distribution of CXF a system property can be used to enable CXF logging across all usage in the application server - see the WildFly docs.

Example System Property
<system-properties>
  <property name="org.apache.cxf.logging.enabled" value="true"/>
</system-properties>

results matching ""

    No results matching ""