Web Service Data Sources

Web service data sources use a Teiid specific JCA connector that is deployed into WildFly 11.0.0 during installation. There are many ways to create the file data source, using CLI, AdminShell, admin-console etc. The example shown below uses the CLI tool, as this works in both Standalone and Domain modes.

Execute following command using the CLI once you connected to the Server. Make sure you provide the correct endpoint and other properties below. Add any additional properties required by the connector by duplicating the "connection-definitions" command below. Edit the JNDI name to match the JNDI name you used in VDB.

batch
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS:add(jndi-name=java:/wsDS, class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true, use-java-context=true)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=webservice:activate
runbatch

To find out all the properties that are supported by this Web Service Connector execute the following command in the CLI.

/subsystem=teiid:read-rar-description(rar-name=webservice)

The Web Service Data Source supports specifying a WSDL using the Wsdl property.  If the Wsdl property is set, then the ServiceName, EndPointName, and NamespaceUri properties should also be set.  The Wsdl property may be a URL or file location or the WSDL to use.

Tip
 Developer’s Tip - If WildFly 11.0.0 is running in standalone mode, you can also manually edit the "<jboss-install>/standalone/configuration/standalone-teiid.xml" file and add the XML configuration defined in *"<jboss-install>/docs/teiid/datasources/web-service" directory under "resource-adapters" subsystem. Shutdown the server before you edit this file, and restart after the modifications are done.

All available configuration properties of web resource-adapter

Property Name applies to Required Default Value Description

EndPoint

HTTP & SOAP

false

n/a

URL for HTTP, Service Endpoint for SOAP. Not required if using HTTP invoke procedures that specify absolute URLs. Will be used as the base URL if an invoke procedure uses a relative URL.

SecurityType

HTTP & SOAP

false

none

Type of Authentication to used with the web service. Allowed values ["None","HTTPBasic","WSSecurity", "Kerberos", "OAuth"]

AuthUserName

HTTP & SOAP

false

n/a

Name value for authentication, used in HTTPBasic and WsSecurity

AuthPassword

HTTP & SOAP

false

n/a

Password value for authentication, used in HTTPBasic and WsSecurity

ConfigFile

HTTP & SOAP

false

n/a

CXF client configuration File or URL

EndPointName

HTTP & SOAP

false

teiid

Local part of the end point QName to use with this connection, needs to match one defined in cxf file

ServiceName

SOAP

false

n/a

Local part of the service QName to use with this connection

NamespaceUri

SOAP

false

http://teiid.org

Namespace URI of the service QName to use with this connection

RequestTimeout

HTTP & SOAP

false

n/a

Timeout for request

ConnectTimeout

HTTP & SOAP

false

n/a

Timeout for connection

Wsdl

SOAP

false

n/a

WSDL file or URL for the web service

CXF Configuration

Each web service data source may choose a particular CXF config file and port configuration. The ConfigFile config property specifies the Spring XML configuration file for the CXF Bus and port configuration to be used by connections. If no config file is specified then the system default configuration will be used.

Only 1 port configuration can be used by this data source. You may explicitly set the local name of the port QName to use via the ConfigName property. The namespace URI for the QName in your config file should match your WSDL/namespace setting on the data source or use the default of http://teiid.org. See the CXF Documentation and the sections below on WS-Security, Logging, etc. for examples of using the CXF configuration file.

Sample Spring XML Configuration To Set Timeouts
<beans xmlns="http://www.springframework.org/schema/beans"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xmlns:http-conf="http://cxf.apache.org/transports/http/configuration"
        xsi:schemaLocation="http://cxf.apache.org/transports/http/configuration
        http://cxf.apache.org/schemas/configuration/http-conf.xsd
        http://www.springframework.org/schema/beans
        http://www.springframework.org/schema/beans/spring-beans.xsd">

    <http-conf:conduit name="{http://teiid.org}configName.http-conduit">
        <http-conf:client ConnectionTimeout="120000" ReceiveTimeout="240000"/>
    </http-conf:conduit>
</beans>

In the conduit name {http://teiid.org[http://teiid.org]}configName.http-conduit, the namespace, {http://teiid.org[http://teiid.org]}, may be set via the namespace datasource property. Typically that will only need done when also supplying the wsdl setting. The local name is followed by .http-conduit. It will be based upon the configName setting, with a default value of teiid.

See the CXF documentation for all possible configuration options.

Note
 It is not required to use the Spring configuration to set just timeouts. The ConnectionTimeout and ReceiveTimeout can be set via the resource adapter connectTimeout and requestTimeout properties respectively.

Security

To enable the use of WS-Security, the SecurityType should be set to WSSecurity. At this time Teiid does not expect a WSDL to describe the service being used. Thus a Spring XML configuration file is not only required, it must instead contain all of the relevant policy configuration. And just as with the general configuration, each data source is limited to specifying only a single port configuration to use.

batch
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS:add(jndi-name=java:/wsDS, class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true, use-java-context=true)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=ConfigFile:add(value=${jboss.server.home.dir}/standalone/configuration/xxx-jbossws-cxf.xml)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=ConfigName:add(value=port_x)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=SecurityType:add(value=WSSecurity)
/subsystem=resource-adapters/resource-adapter=webservice:activate
runbatch

The corresponding xxx-jbossws-cxf.xml file that adds a timestamp to the SOAP header

Example WS-Security enabled data source
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:jaxws="http://cxf.apache.org/jaxws"
       xsi:schemaLocation="http://www.springframework.org/schema/beans
          http://www.springframework.org/schema/beans/spring-beans.xsd
          http://cxf.apache.org/jaxws
          http://cxf.apache.org/schemas/jaxws.xsd">

    <jaxws:client name="{http://teiid.org}port_x"
        createdFromAPI="true">
        <jaxws:outInterceptors>
            <bean/>
            <ref bean="Timestamp_Request"/>
        </jaxws:outInterceptors>
    </jaxws:client>

    <bean

        id="Timestamp_Request">
        <constructor-arg>
            <map>
                <entry key="action" value="Timestamp"/>
            <map>
        </constructor-arg>
    </bean>

</beans>

Note that the client port configuration is matched to the data source instance by the QName {http://teiid.org}port_x, where the namespace will match your namespace setting or the default of http://teiid.org. The configuration may contain other port configurations with different local names.

For more information on configuring CXF interceptors, please consult the CXF documentation

Kerberos

WS-Security Kerberos is only supported when the WSDL property is defined in resource-adapter connection configuration and only when WSDL Based Procedures are used. WSDL file must contain WS-Policy section, then WS-Policy section is correctly interpreted and enforced on the endpoint. The sample CXF configuration will look like

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:http="http://cxf.apache.org/transports/http/configuration"
    xmlns:jaxws="http://cxf.apache.org/jaxws"
    xmlns:cxf="http://cxf.apache.org/core"
    xmlns:p="http://cxf.apache.org/policy"
    xmlns:sec="http://cxf.apache.org/configuration/security"
    xsi:schemaLocation="http://www.springframework.org/schema/beans           http://www.springframework.org/schema/beans/spring-beans.xsd           http://cxf.apache.org/jaxws                           http://cxf.apache.org/schemas/jaxws.xsd           http://cxf.apache.org/transports/http/configuration   http://cxf.apache.org/schemas/configuration/http-conf.xsd           http://cxf.apache.org/configuration/security          http://cxf.apache.org/schemas/configuration/security.xsd           http://cxf.apache.org/core http://cxf.apache.org/schemas/core.xsd           http://cxf.apache.org/policy http://cxf.apache.org/schemas/policy.xsd">
    <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"/>
    <cxf:bus>
        <cxf:features>
            <p:policies/>
            <cxf:logging/>
        </cxf:features>
    </cxf:bus>

    <jaxws:client name="{http://webservices.samples.jboss.org/}HelloWorldPort" createdFromAPI="true">
        <jaxws:properties>
            <entry key="ws-security.kerberos.client">
                <bean class="org.apache.cxf.ws.security.kerberos.KerberosClient">
                    <constructor-arg ref="cxf"/>
                    <property name="contextName" value="alice"/>
                    <property name="serviceName" value="bob@service.example.com"/>
                </bean>
            </entry>
        </jaxws:properties>
    </jaxws:client>
</beans>

and you would need to configure the security-domain in the standalone-teiid.xml file under the 'security' subsystem as

<security-domain name="alice" cache-type="default">
    <authentication>
        <login-module code="Kerberos" flag="required">
            <module-option name="storeKey" value="true"/>
            <module-option name="useKeyTab" value="true"/>
            <module-option name="keyTab" value="/home/alice/alice.keytab"/>
            <module-option name="principal" value="alice@EXAMPLE.COM"/>
            <module-option name="doNotPrompt" value="true"/>
            <module-option name="debug" value="true"/>
            <module-option name="refreshKrb5Config" value="true"/>
        </login-module>
    </authentication>
</security-domain>

for complete list of kerberos properties please refer to this testcase

Logging

Logging, when enabled, will be performed at an INFO level to the org.apache.cxf.interceptor context.

SOAP

The CXF config property may also be used to control the logging of requests and responses for specific or all ports.

Example logging data source
batch
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS:add(jndi-name=java:/wsDS, class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true, use-java-context=true)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=ConfigFile:add(value=${jboss.server.home.dir}/standalone/configuration/xxx-jbossws-cxf.xml)
/subsystem=resource-adapters/resource-adapter=webservice/connection-definitions=wsDS/config-properties=ConfigName:add(value=port_x)
/subsystem=resource-adapters/resource-adapter=webservice:activate
runbatch

Corresponding xxx-jbossws-cxf.xml

Example logging data source
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:jaxws="http://cxf.apache.org/jaxws"
       xsi:schemaLocation="http://www.springframework.org/schema/beans
          http://www.springframework.org/schema/beans/spring-beans.xsd
          http://cxf.apache.org/jaxws
          http://cxf.apache.org/schemas/jaxws.xsd">

    <jaxws:client name="{http://teiid.org}port_y"
        createdFromAPI="true">
        <jaxws:features>
            <bean class="org.apache.cxf.feature.LoggingFeature"/>
        </jaxws:features>
    </jaxws:client>

</beans>

All CXF Usage

With the WildFly distribution of CXF a system property can be used to enable CXF logging across all usage in the application server (including salesforce) - see the WildFly docs.

Example System Property
<system-properties>
  <property name="org.apache.cxf.logging.enabled" value="true"/>
</system-properties>

Transport Settings

The CXF config property may also be used to control low level aspects of the HTTP transport. See the CXF documentation for all possible options.

Example Disabling Hostname Verification
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:http-conf="http://cxf.apache.org/transports/http/configuration"
       xsi:schemaLocation="http://cxf.apache.org/transports/http/configuration
                           http://cxf.apache.org/schemas/configuration/http-conf.xsd
                           http://www.springframework.org/schema/beans
                             http://www.springframework.org/schema/beans/spring-beans.xsd">

  <http-conf:conduit name="{http://teiid.org}port_z.http-conduit">
     <!-- WARNING ! disableCNcheck=true should NOT be used in production -->
     <http-conf:tlsClientParameters disableCNcheck="true" />

  </http-conf:conduit>
</beans>

Configuring SSL Support (Https)

For using the HTTPS, you can configure CXF file as below

<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:sec="http://cxf.apache.org/configuration/security"
    xmlns:http-conf="http://cxf.apache.org/transports/http/configuration"
    xmlns:jaxws="http://java.sun.com/xml/ns/jaxws"
    xsi:schemaLocation="http://cxf.apache.org/transports/http/configuration http://cxf.apache.org/schemas/configuration/http-conf.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd http://cxf.apache.org/configuration/security http://cxf.apache.org/schemas/configuration/security.xsd">

    <http-conf:conduit name="*.http-conduit">
        <http-conf:client ConnectionTimeout="120000" ReceiveTimeout="240000"/>
        <http-conf:tlsClientParameters secureSocketProtocol="SSL">
          <sec:trustManagers>
            <sec:keyStore type="JKS" password="changeit" file="/path/to/truststore.jks"/>
          </sec:trustManagers>
        </http-conf:tlsClientParameters>
    </http-conf:conduit>
</beans>

for all the http-conduit based configuration see http://cxf.apache.org/docs/client-http-transport-including-ssl-support.html. You can also configure for HTTPBasic, kerberos, etc.

results matching ""

    No results matching ""